2006 HOGG & DAVIS 16 ft 4 in Single Axle
Description
Pulling Specifications
Max Pull: Up To 24,000 lbs. (Bare Drum)
Reel Capacity Diameter: 50″ up to 108″
Reel Capacity Width: 56″
Friction Drive System
Drive Roller Housings
Center-Mounted Power Unit
Main Frame
Fully Boxed & Reinforced: “Zero Deflection” Mainframe
Boxed and Reinforced Drawbar
Replaceable Pintle Eye and Safety Chains
20,000 lbs. Stub Spindle Axle
Full Air Brakes w/ ABS
Multi-Pocket Vertical Lift Hydraulic Mandrel Racks
2 1/2″ Heat-Treated Reel Mandrel w/ Centering Cones
Hydraulically Raised and Lowered Drawbar w/ Load-Locked Cylinder
Hydraulically Powered Idler Wheel w/ Solid Rubber Tire and Steer-Go Power Steering
Four Bank Hydraulic Control Valve w/ Pressure Relief, Gauge, and Positional Levers
Stainless Steel Hydraulic Tubing
Power Unit
Electric Throttle Activation
Micro Switch Energized Electric/Hydraulic Proportional Controllers
Closed-loop Hydraulic System
Two-speed Final Drive w/ Electric-Activated Shift
Open Center Auxiliary Hydraulic System
Load-Locked Cylinder Provides Pressure to Reel
2 7/16″ Chrome-Plated Drive Shaft
Auxiliary Power Shaft w/ Bayonet
Hydraulic Oil Cooler Mounted at the Engine Radiator Air Intake
Engine Specifications
Yanmar 3TNV88C-DYEM
Power Rating: 36.8HP @ 3000 rpm
Compression Ignition
Cold Weather Block Heater
Cylinders: 3
HOGG & DAVIS HYDRA 985Specifications
Year2006
ManufacturerHOGG & DAVIS
VIN1H91H131061011065
ConditionUsed
Stock Number24R5
Number of Rear AxlesSingle
Gross Vehicle Weight21,450 lb
Length16 ft 4 in
Year2006|
ManufacturerHOGG & DAVIS|
VIN1H91H131061011065|
ConditionUsed|
Stock Number24R5|
Number of Rear AxlesSingle|
Gross Vehicle Weight21,450 lb|
Length16 ft 4 in|
