I-Beam-Oak-Spring Sus-Elec Brakes-Plated Wheels
Felling FT16 DDI-18 Equipment Trailer – I-Beam Frame – Oak Deck – Spring Suspension – Electric Brakes – Plated Wheels Specs
General
Category: Drop-Deck Equipment Trailer
Model: FT16 DDI-18
Trailer Series: DDI (Drop Deck I-Series)
Deck Length: 18 ft.
GVWR: 18,400 lbs.
GAWR: 16,000 lbs. (2 × 8,000-lb axles)
Approximate Trailer Weight: 4,000 lbs.
Approximate Payload Capacity: 14,400 lbs.
Applications: Skid steers, compact track loaders, mini excavators, tractors, and heavy equipment hauling.
Frame & Deck
Main Frame: 10" × 15 lb. I-beam
Crossmembers: 4" (80K) Junior I-beam
Crossmember Spacing: 18 in. on center
Deck Material: 2" nominal white oak
Deck Length: 18 ft.
Deck Width: 83 in. inside / 102 in. overall
Approximate Deck Height: 24" loaded / 27" unloaded
Rear Ramps: 6' × 16" angle iron spring-assist ramps
Ramp Accessory: Full-width ramp rod
Axles & Suspension
Axles: (2) 8,000-lb Dexter oil-bath drop axles
Suspension: Dexter spring suspension
Axle Spread: 36 in.
Hubs: Oil-bath hubs
Brakes: Dexter forward self-adjusting electric brakes on all axles
Tires & Wheels
Tire Size: 215/75R17.5 Load Range H
Wheel Size: 17.5" × 6.75"
Wheel Type: 8-bolt plated steel wheels
Quantity: 4 tires and wheels
Hitch & Loading
Hitch Type: Adjustable 2.5" lunette eye/pintle hitch
Hitch Rating: 42,000 lbs.
Hitch Length: Approx. 5 ft. (center of coupler to headboard)
Hitch Height Adjustment: Approx. 14.5"–23.5"
Jack: 12,000-lb drop-leg spring-foot side-wind jack
Electrical & Safety
Trailer Plug: 7-pole RV plug
Lighting: LED 4-tail light system with sealed wiring harness
Tie Downs: (8) 5/8" straight D-rings
Safety Chains: 3/8" Grade 70
Document Holder: Standard
Finish: Felling black powder coat with white decals
Key Features
Heavy-duty 18,400-lb GVWR with approximately 14,400-lb payload capacity
Rugged I-beam frame designed for commercial equipment hauling
Durable white oak deck built for long-term use
Spring suspension with 36" axle spread provides reliable performance under heavy loads
Self-adjusting electric brakes on both axles for improved stopping control
Plated steel wheels provide a durable heavy-duty wheel package
Ideal for contractors, landscapers, municipalities, and equipment rental operations
FELLING FT16I-18S
*Monthly payment stated above assumes a secured commercial use loan transaction available for highly qualified commercial loan applicants. Actual loan payment amount and terms may vary. Consumer financing not available for consumers residing in Nevada. Additional state restrictions may apply. Equal opportunity lender. Click here for more state licenses and disclosures. NMLS ID: 1857954. VERMONT RESIDENTS: THIS IS A LOAN SOLICITATION ONLY. CurrencyFinance IS NOT THE LENDER. INFORMATION RECEIVED WILL BE SHARED WITH ONE OR MORE THIRD PARTIES IN CONNECTION WITH YOUR LOAN INQUIRY. THE LENDER MAY NOT BE SUBJECT TO ALL VERMONT LENDING LAWS. THE LENDER MAY BE SUBJECT TO FEDERAL LENDING LAWS. CALIFORNIA RESIDENTS: Financing provided or arranged by Express Tech-Financing, LLC dba Currency pursuant to California Finance Lender License #60DBO54873
Your current browser cannot run our content, please make sure your browser is fully updated or try one of the browsers below.
Get Financing
