Description
Trailer-I-Beam-Drill Spec-20+3-Oak-Torsion-Elec
Felling FT24 DDI-DS Drill Series Trailer – I-Beam – 20+3 Deck – Oak – Torsion Suspension – Electric Brakes Specs
General
Category: Drop-Deck Equipment Trailer (Horizontal Directional Drill Series)
Model: FT24 DDI-DS
Trailer Series: DDI Drill Series
Deck Configuration: 20 ft. main deck + 3 ft. wood-inlay dovetail
GVWR: 25,980 lbs.
GAWR: 24,000 lbs. (2 × 12,000-lb axles)
Approximate Trailer Weight: 5,275 lbs.
Approximate Payload Capacity: 20,705 lbs.
Applications: Transporting horizontal directional drills, skid steers, compact track loaders, mini excavators, and other construction equipment.
Frame & Deck
Main Frame: 10" × 17 lb. cold-formed I-beam
Crossmembers: 4" (80K) Jr. I-beam
Crossmember Spacing: 18 in. on center
Deck Material: 2" nominal white oak
Main Deck Length: 20 ft.
Dovetail Length: 3 ft. wood inlay
Overall Width: 102 in.
Deck Width: 82 in. between fenders
Approximate Deck Height: 24 in. loaded / 26 in. unloaded (torsion suspension)
Drill Series Features
Drill-Specific Layout: Designed for horizontal directional drilling equipment
Low Deck Height: Helps load low-clearance drills without dunnage
Roadside Ramp Storage: Full-width ramp rod with hold-up anchor
Tie-Down System: (10) heavy-duty 1" straight D-rings positioned specifically for HDD equipment
Gradual Loading Angle: Improves loading and unloading of directional drills.
Rear Loading
Dovetail: 3 ft. wood-inlay dovetail
Ramps: (2) 6' × 16" angle iron spring-assist ramps
Ramp Capacity: Maximum 15,000 lbs. axle load per ramp pair
Ramp Storage: Roadside mounted with full-width ramp rod.
Axles & Suspension
Axles: (2) 12,000-lb Dexter® oil-bath axles
Suspension: Dexter® Torflex® rubber torsion suspension
Axle Spread: 42 in.
Brakes: Dexter® forward self-adjusting electric brakes on all axles
Hubs: Oil-bath hubs.
Tires & Wheels
Tire Size: 235/75R17.5 Load Range J
Wheel Size: 17.5 × 6.75 in.
Wheel Type: 8-bolt plate steel wheels
Quantity: 4 tires and wheels.
Hitch
Coupler: 3" adjustable lunette eye/pintle hitch
Coupler Rating: 50,000 lbs.
Hitch Length: 5 ft. (center of coupler to headboard)
Hitch Height Adjustment: Approximately 14–23 in.
Jack: 12,000-lb drop-leg, side-wind jack
Electrical Plug: 7-way RV.
Electrical & Safety
Lighting: LED lighting with sealed wiring harness
Safety Chains: 1/2" Grade 70 safety chains
Document Holder: Standard
Finish: Felling black powder coat with white decals.
Key Features
25,980-lb GVWR with approximately 20,705-lb payload capacity
Heavy-duty 10" I-beam frame engineered for demanding commercial use
Dexter Torflex® torsion suspension provides a smooth ride and reduced maintenance
Drill Series configuration features optimized tie-down locations and a low loading angle for horizontal directional drills
20' deck plus 3' dovetail accommodates a wide variety of equipment
Self-adjusting electric brakes, oil-bath axles, and LED lighting enhance reliability and safety
Ideal for HDD contractors, utility companies, municipalities, and construction fleets.
FELLING FT24I-20+3T DSSpecifications
Year2026
ManufacturerFELLING
VINFT24-DDI-DS
ConditionNew
Stock NumberFT24-DDI-DS
Year2026|
ManufacturerFELLING|
VINFT24-DDI-DS|
ConditionNew|
Stock NumberFT24-DDI-DS|
