Description
Trailer-I-Beam-Oak-Torsion-Elec Brakes-Plated
Manufacturer: Felling Trailers
Model: FT16 DDI-20
Type: Drop-Deck Equipment Trailer
Series: DDI (Drop Deck I-Series)
Deck Length: 20'
Deck Width: 83" between fenders / 102" overall
GVWR: 18,400 lbs.
GAWR: 16,000 lbs. (2 × 8,000-lb. axles)
Approx. Trailer Weight: 4,000 lbs.
Approx. Payload Capacity: 14,400 lbs.
Main Frame: 10" × 15 lb./ft. I-beam
Crossmembers: 4" (80K) Jr. I-beam
Crossmember Spacing: 18" on center
Deck: 2" nominal White Oak
Deck Height: Approx. 24" loaded / 27" unloaded
Rear Ramps: 6' × 16" angle-iron spring-assist ramps
Ramp Accessory: Full-width ramp rod
Axles: Tandem 8,000-lb. Dexter oil-bath drop axles
Suspension: Dexter TorFlex rubber torsion
Axle Spread: 42"
Brakes: Dexter forward self-adjusting electric brakes on all axles
Tires: 215/75R17.5 Load Range H
Wheels: 17.5" × 6.75", 8-bolt plated steel
Hubs: Oil-bath
Tie-Downs: Eight 5/8" straight D-rings
Coupler: Adjustable 2.5" lunette eye/pintle
Coupler Rating: 42,000 lbs.
Jack: 12,000-lb. side-wind drop-leg
Electrical Plug: 7-way RV
Lighting: LED, 4-tail-light system
Wiring: Sealed wiring harness
Safety Chains: 3/8" Grade 70
Document Holder: Standard
Finish: Felling Black powder coat with white Felling decal
Construction: Heavy-duty steel
FELLING FT16I-20TSpecifications
Year2026
ManufacturerFELLING
VIN258880
ConditionNew
Stock Number258880
Year2026|
ManufacturerFELLING|
VIN258880|
ConditionNew|
Stock Number258880|