Description
Trailer-I-Beam-Drill Spec-20+3-Oak-Torsion-Elec
Manufacturer: Felling Trailers
Model: FT24 DDI-DS
Type: Drop-Deck Equipment / Drill Trailer
Series: DDI Drill Series
Deck Configuration: 20' main deck + 3' wood-inlay dovetail
Overall Width: 102" outside / 82" inside
GVWR: 25,980 lbs.
GAWR: 24,000 lbs.
Approx. Trailer Weight: 5,275 lbs.
Approx. Payload Capacity: 20,705 lbs.
Main Frame: 10" × 17 lb. I-beam
Crossmembers: 4" 80K Jr. I-beam
Crossmember Spacing: 18" centers
Decking: 2" nominal White Oak
Dovetail: 3' wood-inlay
Deck Height: Approx. 24" loaded / 26" unloaded
Rear Ramps: 6' × 16" angle-iron spring-assist ramps
Ramp Mounting: Roadside mount with hold-up anchor and full-width ramp rod
Tie-Downs: (10) 1" straight D-rings, including 5/8" D-rings on deck and dovetail
Axles: (2) 12,000-lb. Dexter oil-bath axles
Suspension: Dexter TorFlex rubber torsion
Axle Spread: 42"
Brakes: Electric, Dexter forward self-adjusting on all axles
Tires: 235/75R17.5 Load Range J
Wheels: 17.5" × 6.75", 8-bolt plated steel
Hitch: Adjustable 3" lunette eye/pintle
Hitch Rating: 50,000 lbs.
Hitch Length: Approx. 5' from center of coupler to headboard
Hitch Height: Approx. 14"–23" adjustment range
Jack: 12,000-lb. side-wind drop-leg
Electrical: 7-pole RV plug
Lighting: LED 4-tail-light system
Wiring: Sealed wiring harness
Safety Chains: 1/2" Grade 70
Drill Package: Drill-ready configuration with mounting provisions for tank/pump and related equipment
Document Holder: Standard
Finish: Felling black powder coat with white Felling decals
Primary Use: Horizontal directional drill, utility and underground equipment hauling
FELLING FT24I-20+3T DSSpecifications
Year2026
ManufacturerFELLING
VIN257833
ConditionNew
Stock Number257833
Year2026|
ManufacturerFELLING|
VIN257833|
ConditionNew|
Stock Number257833|